After a long absence due to our relocation to Vienna, Austria, and after a careful redesign of the circuit, we’re happy to announce the CompIQ Twain Pro (MK2) Dual-Band / Stacked Compressor Pedal for bass, guitar, or any electric instruments.
The Twain MK2 version removes both saturation engines on the dry line, which were intended to add controlled harmonic distortion for dual-band processing on MK1. Instead, it adds a multi-function switch for Feed Forward / Feed-Back compression mode for each band, or a combination of Feed-Forward for Lows and Feed-Back for Highs. It also includes a variable Side-Chain Filter with cut or boost in the control signal for both bands, an updated input preamp with ±12dB boost or cut, and a signal peak level indicator for input and output. Additionally, we offer the optional DITOS transformer-balanced DI output to send the signal to a mixing desk, recording interface, or other processor down the line.
In Feed-Forward mode, compression is fast and accurate, utilizing a pre-VCA copy of the input signal. This mode can range from subtle compression to brick-wall limiting, depending on the control settings. The newly introduced “old-school” Feed-Back compression delivers a smoother response, ideal for transparently evening out playing dynamics, using a post-VCA copy of the audio signal for dynamic processing. A combination of the two modes is available, providing compression and up to limiting for the lows (Feed Forward) and smooth compression for the highs (Feed-Back).
With the flip of a switch, the two independent engines can be stacked in series to slow down compression further, achieving a thick & gluing or fine smoothing, optical-like compression feel. This mode benefits from the variable Side-Chain Filters on both lows and highs.
The Side-Chain capabilities now include a variable Lo-cut/boost filter specifically designed for bass instruments (±12dB @ 90Hz, 12dB/octave), which helps prevent premature engagement of the lows compressor. The matching variable Hi-cut/boost filter (±7dB @ 3kHz, 12dB/octave) further smooths out the compression feel for the highs. These enhancements manage optimal compression across lows, mids, and highs, delivering professional dynamics and extending the threshold range down to -50dBu when boosting their frequencies in the side-chain.
The optional DITOS board features a transformer-coupled balanced output in 1/4″ TRS format for direct recording or signal sending. It can also serve as an unbalanced floating output to another pedal or amplifier, capturing output transformer warmth. The main output is always functional.
The Twain Pro MK2 retains the highest performance 4320 THAT Analog Engine® enhanced by Burr-Brown™ FET signal conditioning throughout the circuit, rendering tight and punchy lows, and warm-ringing highs. It provides the musical response of studio quality vintage analog circuitry processing, with full controls for professional compression and limiting in a very compact format.
Twain Pro MK2 key features
- Functions as Dual-Band compressor or Stacking compressors in series
- Two independent 4320 THAT Analog Engines® with RMS-level sensors coupled with high-performance Blackmer® VCA’s
- Optional DITOS transformer-coupled balanced output (10KΩ impedance; can function as floating unbalanced output as well)
- Input Preamp with trimming for -12dB of attenuation and up to +12dB of gain
- Peak level indicator for signals above -2dBu at input preamp and +2dBu at final output buffer
- Variable 70Hz to 1KHz Linkwitz–Riley Crossover
- Independent Ratio, Threshold, and Make-up Gain
- Independent Compression Knee (Soft/Hard)
- Independent Dynamic Auto Timing presets (Auto Fast / Auto Slower)
- Selectable Feed Forward / Feed-Back / Combined compression mode
- Side Chain Frequency Compensation for balancing the triggering potential of Lows & Highs – equivalent to a frequency-based progressive threshold
- Side Chain Filters with cut & boost function on Lows and Highs engines
- Dry / Wet Mix knob for parallel compression in either of the working modes
- 6-LED gain reduction display on each band
- True Bypass on/off footswitch
- 9-18V DC external power supply (not included), center negative, 12mm long barrel plug
- Road-ready, durable, black-powdered aluminum enclosure (Hammond)
- 3-years warranty (direct to manufacturer, international, transferable)
- Hand-assembled in Vienna, Austria
The CompIQ Twain Pro Compressor MK2 has an EU street price of 319,00 € (359,00 € with DITOS) excl.VAT and can be purchased directly from our shop or select retailers starting with 30 July 2024.
For more: Click Here